Filter
Top Products
Configuring Switch Information 247
Modifying STP Port Properties:
1 Open the STP Port Settings page.
2 Modify the Priority, Path Cost, Default Path Cost, and the Fast Link fields.
3 Click Apply Changes. The STP port parameters are modified, and the device is
updated.
STP Port Table Page
Defining STP Port Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port
parameters as displayed in the STP Port Settings page.
The following is an example of the CLI commands:
Console(config)# interface ethernet 1/e5
Console(config-if)# spanning-tree disable
CLI Command Description
spanning-tree disable Disables spanning tree on a specific port.
spanning-tree cost cost Configures the spanning tree port cost
for a port.
spanning-tree port-
priority priority
Configures port priority.
show spanning-tree [ethernet
interface | port-channel
port-channel-number]
Displays spanning tree configuration.
spanning-tree portfast Enables PortFast mode.