Filter
Top Products
Configuring Switch Information 261
The following is an example of the CLI commands:
Console # vlan database
Console (config-vlan)# vlan 1972
Console (config-vlan)# exit
Console (config)# interface vlan 1972
Console (config-if)# name Marketing
Console (config-if)# exit
Console (config)# interface range ethernet 1/e18 - e20
Defining VLAN Ports Settings
The VLAN Port Settings page provides parameters for managing ports that are part of a
VLAN.
The Port Default VLAN ID (PVID) is configured on the VLAN Port Settings page. All
untagged packets arriving to the device are tagged by the ports PVID. To open the VLAN
Port Settings page:
•Click Switch > VLAN > Port Settings in the Tree View. The VLAN Port Settings
page opens.
interface vlan vlan-id
Enters the interface configuration
(VLAN) mode to configure an existing
VLAN.
name string
Adds a name to a VLAN.
interface range ethernet
{port-range | all}
Enables command execution on multiple
ports at the same time.
switchport forbidden vlan
{add vlan-list | remove
vlan-list}
Forbids adding specific VLANs to the port
CLI Command Description