Dell 3348 Switch User Manual


 
Configuring Quality of Service 347
CoS to Queue Mapping Table Page
The CoS to Queue Mapping Table page contains the following fields:
Class of Service—Specifies the CoS priority tag values, where zero is the lowest and
seven is the highest.
Queue—Indicates the traffic forwarding queue to which the CoS priority is mapped.
Four traffic priority queues are supported.
NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,
assigning additional traffic to Queue 4 may interfere with stack control.
Use Defaults—Uses the device defaults for mapping CoS values to a forwarding
queue.
Mapping a CoS value to a Queue:
1 Open the CoS to Queue page.
2 Select a CoS entry.
3 Define the queue number in the Queue field.
4 Click Apply Changes. The CoS value is mapped to a queue, and the device is
updated.