Filter
Top Products
Configuring System Information 137
The ARP Settings page contains the following fields:
• ARP Entry Age Out (0-4000000)—Indicates the amount of time (seconds) that
passes before an ARP entry is aged out. After this period, the entry is deleted from the
table. The default value is 60,000 seconds.
• Clear ARP Table Entries—Indicates the type of ARP entries that are cleared. The
possible field values are:
– None—Indicates that ARP entries are not cleared.
– All—Indicates that all ARP entries are cleared.
– Static—Indicates that only static ARP entries are cleared.
– Dynamic—Indicates that only dynamic ARP entries are cleared.
• Interface—Select the interface type and the specific interface number. The possible
field values:
– Port—Contains the port list for which ARP can be defined.
– LAG—Contains the LAG list for which ARP can be defined.
– VLAN—Contains the VLAN list for which ARP can be defined.
• IP Address—Select an IP address that is associated with the specified interface.
• MAC Address—Specifies the associated MAC address.
• Status—Specifies the status of the ARP Table entry. The possible field values are:
– Other—Indicates that the ARP entry is neither dynamically learned nor is it a
static entry.
– Invalid—Indicates that the ARP entry is invalid.
– Dynamic—Indicates that the ARP entry was learned dynamically.
– Static—Indicates that the ARP entry is a static entry.
• Remove ARP Entry—Removes an ARP entry from the ARP Table.
– Checked—Removes a specific ARP entry.
– Unchecked—Maintains ARP entries.
Adding a static ARP Table entry:
1 Open the ARP Settings page.
2 Click Add. The Add ARP Entry page opens.