Filter
Top Products
Configuring System Information 117
– Warning—Indicates the lowest level of a device warning. The device is
functioning, but an operational problem has occurred.
– Notice—Provides the network administrators with device information.
– Informational—Provides device information.
– Debug—Provides detailed information about the log. If a Debug error occurs,
contact Dell Online Technical Support (www.support.dell.com).
NOTE: When a severity level is selected, all severity level choices above the selection are
selected automatically.
The Global Log Parameters page also contains check boxes that correspond to a distinct
logging system:
• Console—Indicates the minimum severity level from which logs are sent to the
console.
• RAM Logs—Indicates the minimum severity level from which logs are sent to the Log
File kept in RAM (Cache).
• Log File—Indicates the minimum severity level from which logs are sent to the Log
File kept in FLASH memory.
Enabling Logs:
1 Open the Global Log Parameters page.
2 Select Enable in the Logging drop-down list.
3 Select the log type and log severity in the Global Log Parameters check boxes.
4 Click Apply Changes. The log settings are saved, and the device is updated.
Enabling Logs Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Global Log Parameters page.
CLI Command Description
logging on Enables error message logging.
logging ip-address [port port]
[severity level] [facility
facility] [description text]
Logs messages to a syslog server. For a list of the Severity levels,
see "Log Severity Levels".
logging console level Limits messages logged to the console based on severity.