Filter
Top Products
Configuring System Information 161
Defining line passwords for console sessions:
1 Open the Line Password page.
2 Define the Line Password for Console field.
3 Click Apply Changes. The line password for console sessions is defined, and the device
is updated.
Defining line passwords for Telnet sessions:
1 Open the Line Password page.
2 Define the Line Password for Telnet field.
3 Click Apply Changes. The line password for the Telnet sessions is defined, and the
device is updated.
Defining line passwords for secure Telnet sessions:
1 Open the Line Password page.
2 Define the Line Password for Secure Telnet field.
3 Click Apply Changes. The line password for Secure Telnet sessions is defined, and the
device is updated.
Assigning Line Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Line Password page.
The following is an example of the CLI commands:
Console (config-line)# password dell
Defining Enable Password
The Modify Enable Password page sets a local password to control access to Normal,
Privilege, and Global Configuration. To open the Modify Enable Password page.
CLI Command Description
password password
[encrypted]
Specifies a password on a line.