Filter
Top Products
Configuring Quality of Service 345
Assigning Queue Setting Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
Queue Settings page.
The following is an example of the CLI commands:
Console (config)# wrr-queue bandwidth 10 20 30 40
Console (config)# exit
Console # exit
Console> show qos interface ethernet 1/e3 queueing
Ethernet 1/e3
wrr bandwidth weights and EF priority:
qid-weights Ef - Priority
1
— 10 dis- N/A
2
— 20 dis- N/A
3
— 30 dis- N/A
4
— 1 dis- N/A
Cos-queue map:
cos-qid
0 - 2
1 - 1
2 - 1
3 - 2
4 - 2
5 - 3
CLI Command Description
wrr-queue bandwidth weight1
weight2 . weight_n
Assigns Weighted Round Robin
(WRR) weights to egress queues.
show qos interface [interface-
id] [queuing]
Displays interface QoS data.