348 Configuring Quality of Service
www.dell.com | support.dell.com
Assigning CoS Values to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
Mapping CoS Values to Queues Ta bl e.
The following is an example of the CLI commands:
Console (config)# wrr queue cos-map 4 7
Mapping DSCP Values to Queues
The DSCP Mapping page allows network managers to determine the output queue that is
assigned per a specific DSCP field. To open the DSCP Mapping page:
NOTE: See DSCP to Queue Mapping Table Default Values for the list of DSCP default queue
settings.
• Select Quality of Service > Global Parameters > Global Settings > DSCP Mapping
in the Tree View. The DSCP Mapping page opens.
CLI Command Description
wrr-queue cos-map queue-id
cos1.cosn
Maps assigned CoS values to the egress
queues.