Filter
Top Products
Configuring Switch Information 195
Port Security Table Page
In addition to the fields displayed in the Port Security Page, the Port Security Table page
contains the following additional field:
• Unit No.—Indicates the unit number for which the port security information is
displayed.
Configuring Locked Port Security with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Locked Port
security as displayed in the Port Security Page.
The following is an example of the CLI commands:
From 18.1.16 Console # show ports security
Port Action Trap Frequency Counter
---------------------------------------------
CLI Command Description
shutdown Disables interfaces.
set interface active {ethernet
interface | port-channel port-
channel-number}
Reactivates an interface that is
shutdown due to port security
reasons.
port security <options> trap
frequency
Locks learning of new addresses on
an interface.
show ports security Displays port lock status.