Filter
Top Products
266 Configuring Switch Information
www.dell.com | support.dell.com
• Ingress Filtering—Enables ingress filtering by the LAG. Ingress filtering discards
packets which do not include an ingress port. The possible field values are:
– Enable—Enables ingress filtering by the LAG.
– Disable—Disable ingress filtering by the LAG.
Assigning LAG settings:
1 Open the VLAN LAG Settings page.
2 Define the Port Mode, PVID, Frame Type, and the Ingress Filtering fields.
3 Click Apply Changes. The VLAN LAG parameters are defined, and the device is
updated.
Displaying the VLAN LAG Table:
1 Open the VLAN LAG Settings page.
2 Click Show All. The VLAN LAG Table opens.
VLAN LAG Table
Assigning LAGs to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning LAGs to
VLAN groups as displayed in the VLAN LAG Settings page.
CLI Command Description
switchport mode {access |
LAG | general}
Configures a port VLAN membership mode.
switchport LAG native vlan
vlan-id
Defines the LAG as a member of the
specified VLAN, and the VLAN ID as the
"port default VLAN ID (PVID)".