Filter
Top Products
166 Configuring System Information
www.dell.com | support.dell.com
3 Define the IP Address, Priority, Authentication Port, Number of Retries, Timeout for
Reply, Dead Time, Key String, and Source IP Address fields.
4 Click Apply Changes. The new RADIUS server is added, and the device is updated.
Displaying the RADIUS Server List:
1 Open the RADIUS Settings page.
2 Click Show All. The RADIUS Servers List page opens.
RADIUS Servers List Page
Modifying the RADIUS Server settings:
1 Open the RADIUS Settings page.
2 Click Show All. The RADIUS Servers List page opens.
3 Modify the Priority, Number of Retries, Timeout for Reply, or Dead Time fields.
4 Click Apply Changes. The RADIUS Server settings are modified, and the device is
updated.
Deleting a RADIUS Server for the RADIUS Servers List:
1 Open the RADIUS Settings page.
2 Click Show All. The RADIUS Servers List page opens.
3 Select a RADIUS Server in the RADIUS Servers List .
4 Check the Remove check box. The RADIUS server is removed from the RADIUS
Servers List.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the RADIUS Settings page.