Filter
Top Products
Configuring Switch Information 217
To open the LAG Configuration page:
NOTE: If port configuration is modified while the port is a LAG member, the configuration
change is only effective after the port is removed from the LAG.
•Click Switch > Ports > LAG Configuration in the Tree View. The LAG
Configuration page displays.
LAG Configuration Page
The LAG Configuration page contains the following fields:
• LAG—Indicates the LAG number.
• Description—Provides a user-defined LAG description.
• LAG Type—Indicates the LAG maximum speed capacity.
• Admin Status—Controls the traffic from the selected LAG. By default, this parameter
is set to Up. The possible field values are:
– Up—Enables traffic forwarding through the LAG.
– Down—Disables traffic forwarding through the LAG.