Dell 3348 Switch User Manual


 
354 Configuring Quality of Service
www.dell.com | support.dell.com
Insert UDP Port—A new UDP port may be defined.
Map to Queue—Indicates the traffic queue to which the UDP port is assigned.
NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,
assigning additional traffic to Queue 4 may interfere with stack control.
Remove—Removes UDP port mapping.
Checked—Removes a UDP port mapping.
Unchecked—Maintains a UDP port mapping.
Assigning a UDP port to a Traffic Queue:
1 Open the UDP to Queue page.
2 Select a port in the UDP Port List.
Or
Check the Insert UDP Port check box. The New UDP Port field is enabled.
Define a new UDP port.
3 Select a queue number in the Map to Queue drop-down list.
4 Click Apply Changes. The UDP port is assigned a forwarding queue.
Modifying a UDP Port to Traffic Queue Setting:
1 Open the UDP to Queue page.
2 Select a port mapping in the UDP Port List drop-down list. The queue to which the
port is assigned displays in the Map to Queue drop-down list.
3 Select a new traffic queue in the Map to Queue drop-down list.
4 Click Apply Changes. The UDP mapping is reassigned to a different traffic queue.
Removing a UDP port mapping from a UDP to Traffic Mapping Table:
1 Open the UDP to Queue page.
2 Select a port mapping in the UDP Port List drop-down list. The queue to which the
port is assigned displays in the Map to Queue drop-down list.
3 Check the Remove check box.
4 Click Apply Changes. The UDP port mapping is removed from the UDP to the Traffic
Mapping Table.