Filter
Top Products
Configuring Quality of Service 351
• Insert TCP Port—Enables defining a new TCP port.
• Map to Queue—Indicates the traffic queue to which the TCP port is assigned.
NOTE: In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,
assigning additional traffic to Queue 4 may interfere with stack control.
• Remove—Removes a TCP port mapping.
– Checked—Removes a specific TCP port mapping.
– Unchecked—Maintains a TCP port mapping.
Assigning a TCP port to a Traffic Queue:
1 Open the TCP to Queue page.
2 Select a port in the TCP Port List.
Or
Check the Insert TCP Port check box. The New TCP Port field is enabled. Define a
new TCP port.
3 Select a queue number in the Map to Queue drop-down list.
4 Click Apply Changes. The TCP port is assigned a forwarding queue.
Modifying a TCP Port to Traffic Queue Setting:
1 Open the TCP to Queue page.
2 Select a port in the TCP Port List drop-down list. The queue to which the port is
assigned displays in the Map to Queue drop-down list.
3 Select a new traffic queue in the Map to Queue drop-down list.
4 Click Apply Changes. The TCP port is reassigned to a different traffic queue.
Displaying the TCP to Queue Mapping Table:
1 Open the TCP to Queue page.
2 Click Show All. The TCP to Queue Mapping Table opens.