Dell 3348 Switch User Manual


 
Configuring System Information 165
The following fields set the RADIUS default values:
Default Timeout for Reply (1-30)—Specifies the default amount of time (in seconds)
the device waits for an answer from the RADIUS server before timing out.
NOTE: If Host Specific Timeouts, Retransmit, Dead Time, or Deny values are not specified, the
Global values are applied to each host.
Default Retries (1-10)—Specifies the default number of transmitted requests sent to
RADIUS server before a failure occurs.
Default Dead time (0-2000)—Specifies the default amount of time (in seconds) that
a RADIUS server is bypassed for service requests. The range is 0-2000.
Default Key String (1-16 Characters)—Indicates the Default Key string used for
authenticating and encrypting all RADIUS communications between the device and
the RADIUS server. This key is encrypted.
Source IP Address—Indicates the default IP Address for the device accessing the
RADIUS server.
Defining RADIUS Parameters:
1 Open the RADIUS Settings page.
2 Define the Default Timeout for Reply, Default Retries, Default Dead Time, and
Default Key Strings fields.
3 Click Apply Changes. The RADIUS settings are updated to the device.
Adding a RADIUS Server:
1 Open the RADIUS Settings page.
2 Click Add. The Add RADIUS Settings page opens:
Add RADIUS Server Page