Filter
Top Products
Configuring the PowerConnect 3324/3348 Switch 71
Once Access is granted, command usage is the same as in direct device management:
1 Under Windows click Start>Run and enter the command cmd. The standard
windows command line interface is displayed.
2 Enter the command Telnet and the device IP address.
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>telnet 50.1.1.2
01-Jan-2000 02:40:23 %MSCM-I-NEWTERM: New TELNET connection from
50.1.1.2
User Name:Dell
Password:****
console# show ip interface
Gateway IP Address Activity status
----------------------- -----------------------
50.1.1.100 inactive
IP Address I/F
----------------------- ----------------------
50.1.1.1/8 vlan 1
console#