Filter
Top Products
Installing the PowerConnect 3324/3348 Switch 35
Connecting PowerConnect 3324/3348 to a Power Supply
• Plug in the PowerConnect 3324/3348 to one of the previously listed power sources.
AC Power Connection
AC power should be supplied to the unit through a 1.5m (5 foot) standard power cable with
safety-ground connected.
To connect power to PowerConnect 3324/3348:
1 Connect the power cable to the AC main socket located on the rear panel. If there is a
redundant power module, connect this redundant power module cable to a separate
power supply.
2 Connect the power cable to a grounded AC outlet.
3 Confirm that the device is connected and operating correctly by examining the LEDs
on the front panel. For more information about LEDs, see "LED Definitions".
Cable, Port, and Pinout Information
This section describes the PowerConnect 3324/3348 physical interfaces and provides
information about cable connections. Stations are connected to PowerConnect 3324/3348
ports through the physical interface ports on the front panel. For each station, the
appropriate mode (Half/Full Duplex, Auto) is set.