Configuring System Information 181
• Configuration Upload Destination—Specifies the Configuration file path from
which the file is uploaded.
• Configuration Upload Transfer file name—Indicates the software file to which the
configuration is uploaded. The possible field values are:
– Running Configuration—Uploads the Running Configuration file.
– Startup Configuration—Uploads the Startup Configuration file.
– Backup Configuration—Uploads the Backup file.
Uploading files:
1 Open the File Upload to Server page.
2 Define the file type to upload.
3 Define the TFTP Server IP Address, Destination, and Transfer file name fields.
4 Click Apply Changes. The software is uploaded to the device.
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the File Upload to Server page.
The following is an example of the CLI commands:
-----------------------------------------------------
console# copy tftp://16.1.1.200/file1 image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!2883576 bytes
copied in 00:00:10 [hh:mm:ss]
CLI Command Description
copy source-url destination-url
[snmp]
Copies any file from a source to a
destination.