Configuring Switch Information 277
• LACP Port Priority—Indicates the port LACP priority value. The default is 1.
• LACP Timeout—Assigns an administrative LACP timeout.The possible field values
are:
– Short—Specifies a short timeout value.
– Long—Specifies a long timeout value.
Defining Port Parameters:
1 Open the LACP Parameters page.
2 Scroll to the Link Aggregation Port Parameters Table.
3 Define the LACP System Priority and the LACP Timeout fields.
4 Click Apply Changes. The Link Aggregation Global Parameters are defined, and the
device is updated.
Displaying the LACP Parameters Table:
1 Open the LACP Parameters page.
2 Click Show All. The LACP Parameters Table opens.
LACP Parameters Table
In addition to the LACP Parameters page fields, the LACP Parameters Table page also
displays the following field:
• Unit—Indicates the stacking unit number for which the LACP information is
displayed.