Filter
Top Products
238 Configuring Switch Information
www.dell.com | support.dell.com
NOTE: The following relationships between the various timer values must be maintained: Leave
time must be greater than or equal to three times the join time. Leave-all time must be greater
than the leave time.
Defining GARP Timers:
1 Open the GARP Timers page.
2 Define the Interface, GARP Join Time, GARP Leave Timer, and GARP Leave All
Timer.
3 Click Apply Changes. The GARP parameters are saved to the device.
Displaying the GARP Timers Table:
1 Open the GARP Timers page.
2 Click Show All. The GARP Timers Table opens.
GARP Timers Table
In addition to the GARP Timers page fields, the GARP Timers Table page also displays the
following fields:
• Unit No.—Indicates the stacking unit number.
• Copy From—Copies the port GVRP parameters to interfaces specified in the Copy to
field.
• Copy To—Indicates the interfaces to which the GVRP Timers are copied.
Copying GARP Information:
1 Open the GARP Timers page.
2 Click Show All. The GARP Timers Table opens.