Filter
Top Products
144 Configuring System Information
www.dell.com | support.dell.com
• Source IP Address—Indicates the interface Source IP Address to which the packet is
matched.
• Network Mask—Indicates the interface network mask to which the packet is matched.
• Prefix Length—Indicates the prefix length to which the packet is matched.
• Action—Defines the Management Security Rule action. The possible field values are:
– Permit—Permits management access to the defined interface.
– Deny—Denies management access to the defined interface.
3 Define the Access Profile Name field.
4 Define the Rule Priority, Management Method, Interface, Source IP, Network Mask,
Prefix Length, and Action fields.
5 Click Apply Changes. The new Access Profile is added, and the device is updated.
Adding Rules to Access Profile:
NOTE: The first rule must be defined to begin matching traffic to access profiles.
1
Open the Access Profiles page.
2 Click Add Rule to Profile. The Add An Access Profile Rule page opens.
Add An Access Profile Rule Page
The Add An Access Profile Rule page contains the following fields:
• Access Profile Name—Indicates the name of the Access Profile.
• Rule Priority (1-65535)—Indicates the rule priority.