Dell 3348 Switch User Manual


 
58 Configuring the PowerConnect 3324/3348 Switch
www.dell.com | support.dell.com
Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
console> enable
console# configure
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password admin
console(config-line)# exit
console(config)# exit
When initially logging onto a device through a Telnet session, enter admin.
When changing a device mode to enable, enter
admin.
Configuring an Initial SSH Password
To configure an initial SSH password, enter the following commands:
console> enable
console# configure
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password admin
console(config-line)# exit
console(config)# exit
When initially logging onto a device through a SSH session, enter admin as the
password.
When changing a device’s mode to enable, enter
admin as the password.