Filter
Top Products
172 Configuring System Information
www.dell.com | support.dell.com
SNMP Trap Settings Page
The SNMP Trap Settings page contains the following fields:
• SNMP Trap—Enables sending SNMP traps or SNMP notifications from the switch to
defined trap recipients. The possible field values are:
– Enable—Enables sending SNMP traps or SNMP notifications.
– Disable—Stops all SNMP traps from being sent.
• Authentication Trap—Enables sending SNMP traps when authentication fails to
defined recipients. The possible field values are:
– Enable—Enables sending SNMP traps when authentication failed.
– Disable—Disables sending SNMP traps when authentication failed.
• Select Recipient IP—Specifies the IP address to whom the traps are sent.
• Traps —Determines the trap type sent to the selected recipient. The possible field
values are:
– SNMP V1—Indicates SNMP Version 1 traps are sent.
– SNMP V2c—Indicates SNMP Version 2 traps are sent.
– Disable—Disables sending traps to the recipient.
• Community String—Identifies the community string of the trap manager.
• Remove—Removes Trap Manager Table entries.