Filter
Top Products
Configuring Quality of Service 355
Assigning UDP Ports to Queues Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
UDP to Queue page.
The following is an example of the CLI commands:
Console (config)# qos map udp-port-queue 2000 80 to 2
Console (config)# show qos map udp-port-queue
CLI Command Description
qos map udp-port-queue
port1.port8 to
queue-id
Modifies the UDP-Port to queue.
show qos map udp-port-
queue
Displays the UDP-Port to queue.
no qos map udp-port-queue
Removes the UDP port from a queue.