Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
93
Re
strictions Only administrator or operator-level users can issue this command.
Example usage:
To configure traffic control and enable broadcast storm control system wide:
DGS3100# config traffic control all state enable threshold 15000
storm_type multicast_broadcast
Success.
DGS3100#
show traffic control
Purpose To display current traffic control settings.
Syntax
show traffic control {ports <portlist>}
Description The show traffic control command displays the current storm traffic
control configuration on the Switch.
Parameters ports <portlist> - A port or range of ports whose settings are to be
displayed.
Restrictions None.
Example usage:
To display traffic control setting for ports 1-5:
DGS3100# show traffic control
Traffic Control
Broadcast Multicast Destination
Port Threshold Storm Storm Lookup Fail
-------- -------------- ------------ ---------- ------------
1:1 3500 disable disable disable
1:2 3500 disable disable disable
1:3 3500 disable disable disable
1:4 3500 disable disable disable
1:5 3500 disable disable disable
1:6 3500 disable disable disable
1:7 3500 disable disable disable
1:8 3500 disable disable disable
1:9 3500 disable disable disable
1:10 3500 disable disable disable
1:11 3500 disable disable disable
1:12 3500 disable disable disable
1:13 3500 disable disable disable
1:14 3500 disable disable disable
1:15 3500 disable disable disable
1:16 3500 disable disable disable
1:17 3500 disable disable disable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL