Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
20
1
show lldp
Purpose To display the Link Layer Discovery Protocol (LLDP) on the switch.
Syntax
show lldp configuration port <portlist>
Description The show lldp configuration displays the LLDP configuration on
the switch.
Parameters <portlist> - Specifies a port or range of ports for which the lldp status
is to be displayed..
Restrictions None.
Example usage:
To show LLDP settings:
DGS3100# show lldp
Information
MAC Address
0:22:aa:bb:33
: DGS-3100
kable PoE L2
naged Switch
: Bridge
onfigurations
: Enabled
: Disabled
terval : 5
Multiplier : 2
: 1
y : 1
nterval : 5
DGS3100#
LLDP System
Chassis ID Subtype :
Chassis ID : 00:0
System Name
System Description : DGS-3100-48P Gigabit stac
Ma
System Capabilities
LLDP C
LLDP Status
LLDP Forward Status
Message Tx In
Message Tx Hold
Tx Delay
Reinit Dela
Notification I
show lldp ports
Purpose To display the Link Layer Discovery Protocol (LLDP) ports
configuration on the switch.
Syntax
show lldp ports <portlist>
Description The show lldp ports command displays the information regarding
the ports.
Parameters <portlist> − A port or range of ports to be displayed.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To show the information for port 2:9: