Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
30
ope
rating temperature of the device.
NA means that the device HW revision does not support temperature
reading
Parameters None.
Restrictions None.
Example usage:
To display the Environment options:
DGS-3100# show environment
Unit Side Fan Temperature Warning
(Celsius) Temperature
---- ------------ ------------------- -----------------
1 OK NA NA
3 OK 32 63
4 OK 34 79
5 OK NA NA
DGS-3100#
config time_range
Purpose To configure the time range on the Switch..
Syntax
config time_range <range_name 32> [hours start_time <time
hh:
mm> end_time <time hh:mm> weekdays <daylist> | delete]
Description The config time_range command defines time ranges for access
lists. If the end time is earlier than the start time, the end time will
move to the following day
Parameters
range–name – Specifies the time range name. The range of
characters is 1 - 32.
start_time <time hh:mm> – defines the ti
me on which the time range
will start to be active.
end_time <time hh:mm >– defines the time on which the time range
will stop to be active.
weekdays <daylist> – defi
nes the days of the week on which the
time range will be active.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To configure the time range on the Switch:
DGS-3100# DGS-3100# config time_range xxx hours start_time
10:00 end
_time 11:00 weekdays wed sun
Success.
DGS3100#
show time_range
Purpose To display the currently configured access profiles on the Switch.