Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
20
DGS3100# save
verwrite file [startup-config] ?[Yes/press any key for
no]....01-Jan-2000 19:03
:59 %COPY-I-FILECPY: Files Copy - source URL
running-con
fig destination URL flas
h://startup-config
01-Jan-2000 19:04:06 %COPY-N-TRAP: The copy
opera
tion was completed successfully
Copy succeeded
Success.
DGS3100#
reboot
Purpose To reboot the Switch. If the Switch is a member of a stack, it may be
rebooted individually, without affecting the other members of the
stack.
Syntax
reboot <box_id 1-6>
Description The reboot command restarts the Switch.
Parameters <box_id 1-6> − The unit’s current stack membership number.
Restrictions Only Administrator or operate-level users can issue this command.
Example usage:
To restart the Switch unit 1:
DGS3100# reboot 1
Are you sure you want to proceed with system reboot
no
w? (Y/N)[N] Y
This action may take a few minutes
DGS3100#
reset
Purpose To reset the Switch to the factory default settings.
Syntax
reset
Description The reset command restores the Switch’s configuration to the
default settings assigned from the factory. Execution of the reset
comm
and through the CLI retains the unit’s current stack
membership number.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To restore all of the Switch’s parameters to their default values: