Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
13
DGS3100# create account admin dlink
Enter a case-sensitive password:****
Enter the password again for confirmation:****
Success.
DGS3100#
config account
Purpose To change the password for an existing user account.
Syntax
config account <username 15>
Description The config account command changes the password for a user
account that has been created using the create account command.
The sy
stem prompts for the account’s new password, which may be
between 0 and 15 characters.
Parameters <username 1-15> − the account username.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the user password of ‘dlink’ account:
DGS3100# config account dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS3100#
show account
Purpose To display information about all user accounts on the Switch.
Syntax
show account
Description The show account command displays all account usernames and
their access levels created on the Switch. Up to 31 user accounts
can exist on the Switch at one time.
Parameters None.
Restrictions None.
Example usage:
To display user account information:
DGS3100# show account
Username Access Level
------------------------ --------------------