Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
16
6
26
BANNER COMMANDS
The Banner commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameter
config login_banner <text 0-159>
show login_banner
Each command is listed in detail, as follows:
config login_banner
Purpose Used to define telnet login banner
Syntax
config login_banner <text 0-159>
Description This command allows definition of the login banner text.
Parameters <text 0 – 159> - up to 160 characters
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To define telnet login banner to show ‘D-Link’:
DGS3100# config login_banner D-Link
Success.
DGS3100#
show login_banner
Purpose Used to show the login banner.
Syntax
show login_banner
Description This command allows display of the telnet login banner
Parameters None
Restrictions None
Usage Example:
To show the login banner:
DGS3100# show login_banner
Login banner is : D-Link
DGS3100#