Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
25
Parameters
None.
Restrictions Only Administrator or operate-level users can issue this command
Example usage:
To display the currently active switch:
DGS3100# locate
Success.
DGS3100#
telnet
Purpose To log in to a host that supports Telnet
Syntax
telnet {ip-address | hostname} [port]
Description
Parameters
ip-address – IP address of the destination host. An out-of-band
IP address can be specified as described in the usage
guidelines.
hostname – Hostname of the destination host.
port – A decimal TCP port number, or one of the keywords from
the ports table in the usage guidelines. The default is the Telnet port
(decimal 23) on the host.
Restrictions Only Administrator or operate-level users can issue this command
Example usage:
To display the Environment options:
DGS3100# telnet 192.168.1.100
enable telnet
Purpose To enable the telnet.
Syntax
enable telnet
Description The enable telnet command enables telnet.
Parameters None.
Restrictions Only Administrator or operate-level users can issue this command
Example usage:
To enable telnet:
DGS3100# enable telnet
Success.
DGS3100#