Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
12
0
To define a load-sharing group of ports, group-id 1 with group members ports 5-7 plus port 9:
DGS3100# config link_aggregation group_id 1 ports 5-7,9
Success.
DGS3100#
show link_aggregation
Purpose To display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value 1-32>}{algorithm}
Description The show link_aggregation command displays the current link
aggregation configuration of the Switch.
Parameters group_id <value 1-32> − Specifies the group ID. The Switch allows
up to 32 link aggregation groups to be configured. The group
number identifies each of the groups.
algorithm – shows which hash Algorithm is used for link aggregation
distribution.
Restrictions None.
Example usage:
To display Link Aggregation configuration:
DGS3100# show link_aggregation
Group ID : 1
Member Port : 5-7,9
Active Port :
Status : Disabled
DGS3100#