Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
11
6
config voice_vlan
Purpose To configure the Voice_VLAN settings on the Switch.
Syntax
config voice_vlan [enable [<vlan_name 32> | vlanid <vlanid 1-
4094>] | disable] | oui-table [add <mac-address-prefix>
description <string 32> | delete <mac-address-prefix>] |
[ add <portlist> {mode secure} | delete <portlist> ] |
cos <0-7> {remark} |
aging_time <1-43200>
Description The config voice vlan command configures the various parameters
of Voice VLAN.
Parameters add <mac-address-prefix> - adds the specified MAC address to the
voice VLAN OUI table. (Length: 3 bytes)
description <string 32> - adds the specified text as a description of
the specified MAC address to the voice VLAN OUI table. (Length: 1-
32 characters)
delete < mac-address-prefix> - removes the specified MAC address
from the voice VLAN OUI table. (Length: 3 bytes)
add <portlist> - configure specific ports to be joined automatically to
the Voice VLAN.
mode secure - If mode secured is stated, the ports will be added
automatically in secure mode, so that packets that are classified to
the voice VLAN with a source MAC address that is not a telephony
MAC address(defined by the voice VLAN OUI table) are discarded.
delete <portlist> - remove a port list from the Voice VLAN
vlanid <vlanid 1-4094> - .The VLAN ID number.
cos <0-7> - Defines the Class of Service tag , the default is 6.
remark – the modified CoS tag will be written in the Voice packet.
aging_time <1-43200> - Voice VLAN ageing timeout interval (in
minutes), the default is 1440 minutes.
Restrictions None.
Example usage:
To configure the Voice VLAN status:
DGS-3100# config voice_vlan add 1-2 mode secure
Success.
DGS-3100#
show voice vlan
Purpose To display the Voice VLAN status on the Switch.
Syntax
show voice vlan [ethernet <interface> | port-channel port-
channel]
Description The show voice vlan command displays the Voice VLAN status on
the Switch.
Parameters ethernet <interface> - specifies the Ethernet port number.