Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
14
Dlink User
admin Admin
Total Entries: 2
DGS3100#
show session
Purpose To display information about currently logged-in users.
Syntax
show session
Description The show session command displays a list of all the users that are
logged-in at the time the command is issued. The information
includes the session ID (0 for the first logged-in user, 1 for the next
logged-in user, etc.), the Protocol used to connect to the Switch, the
user’s IP address, the user’s access Level (1=user, 15=admin), and
the account name on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the way users logged in:
DGS3100# show session
ID Protocol
From Level Name
------- ------------------- --------------------- -------- -----------------
0 HTTP 10.6.10.43 15 admin
1 HTTP 10.6.10.43 15 admin
2 Telnet 10.6.60.13 15 admin
DGS3100#
show system defaults
Purpose To display information about all system defaults on the Switch.
Syntax
show system defaults
Description The show system defaults command displays system defaults.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display system default information:
DGS-3100# show system defaults
System Mode: Switch
Maximum units in stack: 6
# Management defaults
Telnet: Enabled