Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
11
4
Description The show vlan_trunk command displays summary information
about VLAN trunking status and configured ports.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To display the Switch’s current VLAN_trunk settings:
DGS-3100# show vlan_trunk
Vlan Trunking : Enabled
Configured Ports : 1:(1-2)
DGS-3100#
config vlan_trunk ports
Purpose To configure VLAN Trunking port settings on the Switch.
Syntax
config vlan_trunk ports <portlist> state [enable | disable]
Description The config vlan_trunk ports command configures the VLAN
trunking port settings on the Switch. The user can enable VLAN
Trunking and define ports to be added to the VLAN Trunking
settings.
Parameters <portlist> − A port or range of ports for which to configure VLAN
Trunking.
state [enable | disable] − enable and disable VLAN trunking.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To define VLAN Trunking:
DGS3100# config vlan_trunk ports 1-2 state disable
Success.
DGS3100#
enable asymmetric_vlan
Purpose To enable Asymmetric VLAN on the switch.
Syntax
enable asymmetric_vlan
Description The enable asymmetric_vlan command, along with the disable
enable asymmetric_vlan command below, is used to enable and
disable Asymmetric VLAN on the Switch
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.