Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
18
2
30
ACCESS AUTHENTICATION CONTROL COMMANDS
The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along
with the appropriate parameters) in the following table.
Command Parameter
create authen_login
method_list_name
<string 12>
config authen_login
[default | method_list_name <string 12>| http_method_list | https_method_list]
method {tacacs+ | radius | local | none}
delete authen_login
method_list_name
<string 12>
show authen_login
{all | default | http_method_list | https_method_list | method_list_name <string
12>}
create authen_enable
method_list_name
<string 12>
config authen_enable
[default | method_list_name <string 12>] method {tacacs+ | radius | local_enable
| none}
delete authen_enable
method_list_name
<string 12>
show authen_enable [all | default | method_list_name <string 12>]
config authen
application
{console | telnet | ssh | all] [login | enable] [default | method_list_name <string
12>]
show authen
application
create authen
server_host
<ipaddr> protocol [tacacs+ | radius] {port <int 1-65535> | key [<key_string 128> |
none] | timeout <int 1-30> | retransmit <int 1-10> | priority [first | second | third]}
config authen
server_host
<ipaddr> protocol tacacs+ {port <int 1-65535> | key [<key_string 128> | none] |
timeout <int 1-30>} priority [first | second | third]
delete authen
server_host
<ipaddr> protocol [tacacs+ | radius]
show authen
server_host
local_enable admin
config admin
local_enable
Each command is listed in detail, as follows: