Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
12
6
the Switch.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command
Example usage:
To enable IGMP snooping on the Switch:
DGS3100# enable igmp_snooping
Success.
DGS3100#
disable igmp_snooping
Purpose To disable IGMP snooping on the Switch.
Syntax
disable igmp_snooping
Description The disable igmp_snooping command disables IGMP snooping on
the Switch. IGMP snooping can be disabled only if IP multicast
routing is not being used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given IP interface.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
TTo disable IGMP snooping on the Switch:
DGS3100# disable igmp_snooping
Success.
DGS3100#
show igmp_snooping
Purpose To show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description The show igmp_snooping command displays the current IGMP
snooping configuration on the Switch.
Parameters <vlan_name 32> − The name of the VLAN for which IGMP snooping
configuration is to be displayed. Up to 32 characters can be used.
Restrictions None.
Example usage:
To show igmp snooping:
DGS3100# show igmp_snooping
IGMP Snooping Global State : Disabled