Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
19
Parameters
<tcp_port_number 1-65535> − The TCP port number. TCP ports are
numbered between 1 and 65535. The ‘well-known’ port for the Web-
based management software is 80.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable HTTP and configure the TCP port number to listen for Telnet requests:
DGS3100# enable web 80
Success.
DGS3100#
disable web
Purpose To disable the HTTP-based management software on the Switch.
Syntax
disable web
Description The disable web command disables the Web-based management
software on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable HTTP-based management software on the Switch:
DGS3100# disable web
Success.
DGS3100#
save
Purpose To save changes in the Switch’s configuration to non-volatile RAM.
Syntax
save
Description The save command saves the current switch configuration to non-
volatile RAM. The saved switch configuration is loaded to the
Switch’s memory each time the Switch is restarted.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM: