Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
10
2
processed. That is, the highest class of service should finish
emptying before the others begin.
round_robin – Specifies that the priority classes of service are to
empty packets in a weighted roundrobin (WRR) order.
Restrictions Only administrator or operator level users can issue this command.
Example usage:
To configure the traffic scheduling mechanism for each COS queue:
DGS3100# config scheduling_mechanism 2 strict
Success.
DGS3100#
show scheduling_mechanism
Purpose To display the current traffic scheduling mechanisms in use on the
Switch.
Syntax
show scheduling_mechanism
Description The show scheduling_mechanism command displays the current
traffic scheduling mechanisms in use on the Switch.
Parameters None.
Restrictions None.
Example usage:
To show the scheduling mechanism:
DGS3100# show scheduling_mechanism
QOS scheduling_mechanism
CLASS ID Mechanism
-------------- -------------------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
DGS3100#
config rate_limit
Purpose To enable rate limitation of specific ingress ports.
Syntax
config rate_limit [<portlist> | all] [disable | <value 3500-
1000000>]
Description The config rate_limit command enables setting of rate limitation of
ingress ports.
Parameters <portlist> − A port or range of ports to be set.