Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
22
8
38
SAFEGUARD COMMANDS
The Safeguard commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameter
config
safeguard_engine
{state [enable | disable] | utilization {rising <value 20-100> | falling <value 20-
100>}
show
safeguard_engine
Each command is listed in detail, as follows:
config safeguard_engine
Purpose To define the safeguard engine on the switch.
Syntax
{state [enable | disable] | utilization {rising <value 20-100> |
falling <value 20-100>}
Description To define the safeguard_engine on the switch.
Parameters state [enable | disable] – enable and disable Safeguard engine on
the Switch.
utilization – Indicates the CPU Utilization thresholds. The possible
field values are:
rising – Indicates the rising CPU Utilization thresholds.The
possible field range is between 20%-100%. The default
value is 70%.
falling – Indicates the falling CPU Utilization thresholds. The
possible field range is between 20%-100%. The default
value is 20%.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To define safeguard engine on the switch:
DGS-3100# config safeguard_engine state enable rising 70 falling 20
Success.
DGS-3100#