Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
94
config traffic trap
Purpose To enable or disable the trap regarding occurance of Storm Control
Syntax
config traffic trap [none | storm_occurred]
Description Use this command to configure the system to show a trap when a
storm attack occurred on a port
Parameters none – no trap will be shown
storm_occured – a trap will be shown when a storm occured
Restrictions None
Example usage:
To configure the traffic trap:
DGS-3100# config traffic trap storm_occurred
Success.
DGS-3100#
config traffic control_recover
Purpose To recover a port that was shutdown due to a storm traffic
Syntax
config traffic control_recover [<portlist> | all]
Description After a port is shut down due to a storm traffic, use this command to
recover it manually.
Parameters ports <portlist> – A port or range of ports whose need to be
recovered
Restrictions Only ports that were shutdown due to a storm traffic will be
recovered
Example usage:
To configure the traffic control recover port settings:
DGS-3100# config traffic control_recover 1:3
Success.
DGS-3100#