Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
41
previou
sly created on the Switch.
Parameters <view_name 30> − A string of up to 30 alphanumeric characters that
identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that is
deleted from the Switch.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DGS3100# delete snmp view dlinkview all
Success.
DGS3100#
show snmp view
Purpose To display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 30>}
Description The show snmp view command displays an SNMP view previously
created on the Switch.
Parameters <view_name 30> − A string of up to 30 alphanumeric characters that
identifies the SNMP view to be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DGS3100# show snmp view
View Name Subtree View Type
------------------- -------------------------- ---------
Default iso included
Default snmpNotificationMIB excluded
Default snmpVacmMIB excluded
Default snmpCommunityMIB excluded
Default snmpTargetAddrTable excluded
Default snmpTargetParamsTable excluded
Default usmUser excluded
Default rndCommunityTable excluded
DefaultSuper iso included
Total Entries: 9
DGS3100#