Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
17
0
28
SSH COMMANDS
The SSH commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameter
enable ssh
disable ssh
config ssh authmode publickey [enable | disable]
show ssh authmode
config ssh server { timeout <sec 120-600> | port <tcp_port_number 1-65535> }
show ssh server
show ssh algorithm
config ssh crypto <username 1-48> [ rsa | dsa ] <sequences>
show ssh crypto
delete ssh crypto <username 1-48>
Each command is listed in detail, as follows:
enable ssh
Purpose To enable SSH.
Syntax
enable ssh
Description The enable ssh command enables SSH on the Switch.
Parameters None
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable SSH:
DGS3100# enable ssh
TELNET will be disabled when enable SSH.
Success.
DGS3100#