Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
83
internal
Cost – The relative cost of forwarding packets to specified
ports when an interface is selected within an STP instance. The
default setting is auto. There are two options:
auto – Specifies setting the quickest route automatically and
optimally for an interface. The default value is derived from
the media speed of the interface.
value 1-200000000 – Specifies setting the quickest route
when a loop occurs. The value may be in the range of 1-
200000000. A lower internalCost represents a quicker
transmission.
priority <value 0-240> - The priority for the port interface The value
may be between 0 and 240. A lower number denotes a higher
priority. A higher priority designates the interface to forward packets
first.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To designate ports 1 through 5 on module one, with instance ID 2, to have an auto internalCost and a priority of 16:
DGS3100# config stp mst_ports 1:1-5 instance_id 2 internalCost auto
priority 16
Success.
DGS3100#