D-Link DGS-3100 Switch User Manual


 
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
15
SSH: Enabled
HTTP: Enabled, port 80
HTTPS: Disabled
SNMP: Enabled.
User: first
SNMP version: V3
SNMP Local Engine ID: 00001
SNMP Notifications: Enabled
SNMP Authentication Notifications: Enabled
AAA Telnet authentication login: Local user data base
AAA HTTP authentication login: Local data base
AAA HTTPS authentication login: Local data base
Logging: Enabled
Logging to console: Informational messages
Logging to internal buffer: Informational messages
Logging to file: Error messages
Logging to remote server: Informational messages
Maximum no. of syslog messages: 430
SNTP Port No.: 123
DGS-3100#
show switch
Purpose To display information about the Switch.
Syntax
show switch
Description The show switch command displays information about the Switch
settings, including Device Type, MAC Address, IP configuration,
Hardware/Software version, System information, and Switch
Network configuration.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
DGS-3100# show switch
Device Type : DGS-3100-48 Gigabit stackable L2 Managed
Sw
itch
MAC Address : 00:11:03:09:18:46
IP Address : 10.5.234.250
VLAN Name : default
Subnet Mask : 255.255.255.0
Default Gateway : 10.5.234.254
Boot PROM Version : 1.0.1.04
Firmware Version : 3.5P.A12
Hardware Version : 01