Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
22
2
delete access_profile
Purpose To delete a previously created access profile
Syntax
delete access_profile profile_id <value 1-15>
Description The delete access_profile command deletes a previously created
access profile on the Switch.
Parameters profile_id <value 1-15> – Specifies the access profile to be deleted.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete the access profile with a profile ID of 1:
DGS3100# delete access_profile profile_id 1
Success.
DGS3100#
show access_profile
Purpose To display the currently configured access profiles on the Switch.
Syntax
show access_profile {profile_id <value 1-15>}
Description
The show access_profile command displays the currently
configured access profiles.
Parameters
profile_id <value 1-15> – Specifies the access profile to be
displayed. This value is assigned to the access profile when it is
created with the create access_profile command. If the profile_id
parameter is omitted, all access profile entries are displayed.
Restrictions None.
Example usage:
To display all of the currently configured access profiles on the Switch:
DGS3100# show access_profile
Access Profile Table
Access Profile ID: 1 TYPE : Ethernet
======================================================================
MASK Option :
VLAN 802.1p
----------- ------
Access ID : 3 Mode: Permit(replaced) priority: 1
Ports: 1
----------- ------
Trinity 1
======================================================================
Access Profile ID: 2 TYPE : IP
======================================================================
MASK Option :
Protocol ID