Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
12
7
Multicast Filtering : Enabled
Vlan Name : default
Host Timeout : 260
Leaver Timer : 10
Route Timeout : 300
State : Disabled
DGS3100#
show igmp_snooping group
Purpose To display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description The show igmp_snooping group command displays the current
IGMP snooping group configuration on the Switch.
Parameters <vlan_name 32> − The name of the VLAN for which IGMP snooping
group configuration information is to be displayed. Up to 32
characters can be used.
Restrictions None.
Example usage:
To show igmp snooping group:
DGS3100# show igmp_snooping group
VLAN Name : default
Multicast group: 224.0.0.2
MAC address : 01-00-5E-00-00-02
Reports : 1
Port Member : 3,4
Total Entries : 1
DGS3100#
show igmp_snooping forwarding
Purpose To display the IGMP snooping forwarding table entries on the
Switch.
Syntax
show igmp_snooping forwarding {vlan <vlan_name 32>}
Description The show igmp_snooping forwarding command displays the
current IGMP snooping forwarding table entries currently configured
on the Switch.
Parameters <vlan_name 32> − The name of the VLAN for which IGMP snooping
forwarding table information is to be displayed. Up to 32 characters
can be used.