Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
31
Syntax
sho
w time_range
Description
The show time_range command displays the time range
configuration.
Parameters None.
Restrictions None.
Example usage:
To display time range settings on the Switch:
DGS3100# show time_range
Range name : xxx
Start time : 10:00
End time : 11:00
Days : wed sun
Total Entries : 1
DGS3100#
config terminal log
Purpose To suppress logging messages on Telnet, Console and SSH
sessions
Syntax
config terminal log state [enable | disable]
Description When disabled only Fatal messages will be shown on the different
sessions screens
Parameters state [enable | disable] − feature is globally enabled or disabled
(enabled by default)
Restrictions None.
Example usage:
To display the Environment options:
DGS-3100# Config terminal log state disable
Success.
DGS3100#
show cable status
Purpose To show the cable status and length attached to a port
Syntax
show cable status ports<portlist>
Description Use the show cable status command to display the estimated
copper cable length attached to a port
Parameters <portlist> − A port or range of ports to be tested.
Restrictions
Example usage:
To display the Environment options: