Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
79
Msti Designated Bridge
Internal PathCost Prio Status Role
-------- ---------------------------------- ------------------------- ----- ---------------- ----------
0 8000 00:23:27:26:46:00 200000 128 Disabled Disabled
DGS3100#
show stp instance_id
Purpose To display the Switch’s STP instance configuration
Syntax
show stp instance_id <value 0-15>}
Description The show stp instance_id command displays the Switch’s current
STP Instance Settings and the STP Instance Operational Status.
Parameters <value 0-15> - The value of the previously configured instance_id on
the Switch. The value may be between 0 and 15. An entry of 0
displays the STP configuration for the CIST internally set on the
Switch.
Restrictions None.
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
DGS3100# show stp instance 0
Instance Type : CIST
Instance Status : Enabled
Instance Priority : 32768
STP Instance Operational Status
-----------------------------------------------
Designated Root Bridge : 32768/00:00:b9:89:46:79
External Root Cost : 200012
Regional Root Bridge : 32768/00:23:27:26:46:00
Internal Root Cost : 0
Root Port : 1:3
Max Age : 20
Forward Delay : 15
Last Topology Change : 23542964
Topology Changes Count : 6
DGS3100#
show stp mst_config_id
Purpose To display the MSTP configuration identification.
Syntax
show stp mst_config_id