Extron electronic MPX PLUS 866 A Switch User Manual


  Open as PDF
of 222
 
SIS
™
Programming and Control, cont’d
MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control
4-18
PRELIMINARY
Command/response table for basic SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Information requests
Information request I
V14X12•A14X12
]
This matrix switcher has 14
video and 14 audio inputs
by 12 video and 12 audio
outputs.
Request part number N 60-796-01 The MPX part number is
68-796-01.
N
There are up to three separate sets of Extron firmware that the switcher can report on: the MPX controller firmware,
which is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the
latest optional Extron firmware update, which is available at www.Extron.com.
Query controller firmware
version
Q
X1^]
Example:
Q
1.23
]
The factory-installed MPX
controller firmware version
is 1.23 (sample value only).
Query software version
(verbose)
0Q
X1^
-
X1&
-
X1&]
Provide a detailed status
of the Ethernet protocol
firmware, the MPX controller
firmware, and any firmware
upgrade. The firmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the firmware
has a bad checksum or an
invalid load. ?.?? indicates
that the firmware is not
loaded.
Response description: Ethernet protocol firmware version - controller firmware version - updated firmware version
]
Example:
0Q
Ethernet protocol
firmware
Response:
Description
MPX firmware version
1.23-0.14(0.20-MPX866D Series -Wed,16Jan200300:00:00GMT)-0.25*(0.24-MPX866DSeries-Mon,08Sep200814:48:30GMT)
Updated firmware version
* indicates the version running Upload date and time
Request system status S
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1(]
Response description:
+3.3V•+5V•-5V•+2.5V•-15V•+15V•Temp
]
Example:
S
3.29•5.04•-5.14•15.27•-15.15•120.20
-15V power system at -15.15V
Temperature 120.20 degrees3.3V power system at 3.29V
N
X1^
= Firmware version number to second decimal place (x.xx)
X1&
= Verbose firmware version-description-upload date/time
X1*
= Voltage Positive or negative voltage and magnitude
X1(
= Temperature Degrees Fahrenheit
 previous next